We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60271

2014.1 Vivado IP Flows - IP Packager GUI does not save the user specified Archive name during the "Review and Package" step


When I change the IP archive name during the "Review and Package" step of IP packaging, it does not take effect.

The GUI still shows the old archive name.

After archiving the IP, the archive file still has the default archive name.

How can I change the archive name?



This issue will be fixed in Vivado 2014.2.

As a workaround, you will need to change the name of the archive twice. 

Click on "Edit", enter a name in the "Archive name" field and click OK. 

If you check the archive name in the IP Packager GUI you will see that this has not taken effect. 

Now click again on "Edit" and enter the desired name in the "Archive name" field and click OK. 

This time the new archive name will be saved. You will see the new name in the IP Packager GUI.

AR# 60271
Date 05/02/2014
Status Archive
Type Known Issues
  • FPGA Device Families
  • Vivado Design Suite - 2014.1
Page Bookmarked