We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60328

2013.4 Linux: Data mismatch in single QSPI flash device at lower frequencies when jffs2 file system is used.


With the latest driver and single QSPI configuration, jffs2 operations will work at a frequency of 100 MHz, but data mismatches are observed for lower frequencies (for example 50 MHz and 25Mhz ).


As a temporary workaround, when using the lower frequencies for QSPI interface, please change the following line:

#define xqspips_read(addr) readl_relaxed(addr)
This line needs to be replaced with:
#define xqspips_read(addr) readl(addr)

The root cause of this issue is currently being investigated.

AR# 60328
Date 05/07/2014
Status Active
Type Known Issues
  • Zynq-7000