We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60337

2014.1 Vivado IP Packager - Cannot see my packaged IP in the IP Catalog or when searching in the IP Integrator block design, why?


I have created an IP Package from a previous project I and added this repository to the IP Catalog, however, when I search the IP Catalog I cannot see the core.

What have I done wrong?

Where is my IP?


In general, this will happen if the IP does not support the current project family.

There is a known issue with IP Packaged for qZynq parts in Vivado 2014.1. 

The IP Compatibility family is incorrectly set to Zynq.


As a result, this IP will not be seen in a qZynq Vivado project when the IP Catalog is opened.

To work around this issue, open the component.xml for your generated IP core in the Vivado GUI and add the qZynq family to the family support, then Re-Package the IP.


This issue is scheduled to be fixed in Vivado release 2014.3.

AR# 60337
Date 05/27/2014
Status Active
Type Known Issues
  • Vivado Design Suite - 2013.4
  • Vivado Design Suite - 2014.1
Page Bookmarked