UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60987

2014.1 Vivado - "undo" does not work for commands between "startgroup" and "endgroup"

Description

In the Vivado Tcl console, the "undo" command does not work for commands between "startgroup" and "endgroup".

For Example: The following two set_property commands cannot be cancelled using the undo command:

startgroup
set_property BITSTREAM.GENERAL.CRC ENABLE [get_designs checkpoint_checkpoint_1]
set_property BITSTREAM.GENERAL.COMPRESS FALSE [get_designs checkpoint_checkpoint_1]
endgroup
undo

Solution

This issue has been fixed in Vivado 2014.2.

To work around the issue, use the "set_property" command to set properties back to the original value.

 

AR# 60987
Date Created 06/05/2014
Last Updated 12/10/2014
Status Active
Type Known Issues
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Zynq-7000
Tools
  • Vivado Design Suite - 2013.4