UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 60995

MIG 7 Series - UG586 - Incorrect CKE_ODT_BYTE_MAP, CKE_MAP and ODT_MAP attributes.

Description

Version Found: MIG 7 Series v2.0 Rev 3
Version Resolved: See (Xilinx Answer 54025)


The CKE_ODT_BYTE_MAP parameter was previously used by the PHY_CONTROL block for CKE/ODT but has since been replaced with the CKE_MAP and ODT_MAP parameters.

Solution

The CKE_ODT_BYTE_MAP, CKE_MAP and ODT_MAP descriptions are currently missing from UG586.

CKE_ODT_BYTE_MAP must always be set to "00" , please refer to the description stated for ADDR_MAP in UG586 for more information.

Revision History

06/09/2014 - Initial Release

Linked Answer Records

Child Answer Records

Answer Number Answer Title Version Found Version Resolved
54025 MIG 7 Series - IP Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 60995
Date Created 06/05/2014
Last Updated 06/06/2014
Status Active
Type Known Issues
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
IP
  • MIG 7 Series