We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 61145

2014.2 Vivado - Project created from write_project_tcl will have IP OOC runs status set to "Not started" even when the original project had IP output products generated


I tried to create a new project from a Tcl script which was created using the write_project_tcl command from an existing project.

However, even though the IP sources (including DCP) were already generated in the original project, I see that OOC runs created for the IP's in the new project have a status of "Not started".

When I run synthesis in this new project, it launches the IP OOC runs which regenerates the IP output products.

This is not needed as there are already generated IP DCP's in the earlier project.



This issue is fixed in Vivado 2014.3. 

As a workaround in Vivado 2014.2 delete the IP runs using the "delete_ip_run" Tcl command in the new project.
AR# 61145
Date 12/16/2014
Status Archive
Type Known Issues
  • FPGA Device Families
  • Vivado Design Suite - 2014.2
Page Bookmarked