UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 61162

2014.1 Vivado Partial Reconfiguration - phy_opt_design fail to force replicate nets in PR design

Description

In a partial reconfiguration design, I am trying to use the following command to force replicate nets:

phys_opt_design -force_replication_on_nets [get_nets XX/rst_sys_200m]

I receive the below error even when the net is the only route in the static logic:

ERROR: [Vivado_Tcl 4-59] phys_opt_design failed with error: 'Error in placer init in PSFlow'
Resolution: For technical support on this issue, please visit http://www.xilinx.com/support.

Solution

This issue is fixed in Vivado 2014.2.
AR# 61162
Date Created 06/17/2014
Last Updated 12/11/2014
Status Active
Type General Article
Tools
  • Vivado Design Suite - 2014.1