UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6131

*Obsolete* 2.1i JTAG Programmer - ERROR:basut - The IDCODE returned indicates that the instance in the boundary-scan chain is not a Xilinx part.

Description

Keywords: error, basut, IDCODE, returned, indicates, boundary-scan, JTAG

Urgency: Standard

General Description:
Errors similar to the following can occur:

ERROR:basut - The IDCODE returned(11111111111111111111111111111100) indicates that the instance '(Device2)' in the boundary-scan chain is not a Xilinx part.

ERROR:basut - Boundary scan chain has been improperly specified. Please check your configuration and re-enter the boundary-scan chain information.
Boundary-scan chain validated unsuccessfully.

Solution

Check the JTAG pins and make sure that they have been connected correctly. Misconnections of the TDI pin lead to this error.
AR# 6131
Date Created 08/31/2007
Last Updated 09/26/2005
Status Archive
Type ??????