You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
MIG 7 Series - the funcsim.v/.vhdl structural simulation model is not supported
Version Found: MIG 7 Series v2.1
See (Xilinx Answer 54025)
MIG only supports behavioral simulations and does not support structural (i.e. gate-level) simulations of any kind.
However, when using Out-Of-Context (OOC) flow the <IP_name>_funcsim.v/.vhdl output products are still generated.
This can be misleading and will cause simulation failures if the <IP_name>_funcsim.v/.vhdl model is used.
Since only behavioral simulations are supported the structural model should not be used.
This can be avoided by only running behavioral models or by manually compiling the MIG IP RTL when combining with structural models used by other IP.
08/05/2014 - Initial Release
Was this Answer Record helpful?