We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 62169

2014.2 Petalinux - PCIe interrupt info missing from the device tree


When I build a PCIe system none of the interrupt information is in the PCIe node of the device tree and the subsystem does not work.

Why is this information missing from the Device Tree?


The interrupt ID cannot be generated properly because the interrupt is connected to the external port and is fed back to another external port before it is connected to the PS interrupt.

PCIE interrupt -> external port1 
external port2 -> PS7 interrupt

There is no board level information about the external port1 being fed back into external port2.

As a result, the device tree generator is not able to detect the interrupt ID

This information should be added to the device tree manually.
AR# 62169
Date 10/16/2014
Status Active
Type General Article
  • Zynq-7000
  • PetaLinux - 2014.2
  • PCI-Express (PCIe)
Page Bookmarked