UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 63393: MIG 7 Series - Crashes when Read XDC/​UCF option is used in Windows 8.1

AR# 63393

MIG 7 Series - Crashes when Read XDC/​UCF option is used in Windows 8.1

Description

Version Found: MIG 7 Series v2.2
Version Resolved: See (Xilinx Answer 54025)

When MIG is generated on a Windows 8.1 64 bit machine, selecting the "Read XDC/UCF" option causes the MIG GUI to crash with the following error message:
 

Failed to generate IP 'mig_7_series_0'. Failed to generate 'Custom UI' outputs.


This occurs with both the "Fixed Pinout mode" and "Verify Pin Changes and Update Design" flows. 

Solution

To work around this issue, manually enter each pin locations into the GUI.


Revision History
102/02/2015 - Initial release

AR# 63393
Date 02/16/2015
Status Active
Type General Article
IP
Page Bookmarked