We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63398

Zynq-7000 SoC, DDRC - Does Xilinx support different DDR trace impedance values than those detailed in Table 5-10 of (UG933)?


I would like to use different trace impedances than those recommended by Xilinx in (UG933) for the PS DDR controller. 

Is this possible?


No, use of other trace impedances is not supported by Xilinx for the PS DDR controller.

LPDDR2 especially must use 40 Ohm trace impedances as the controlled impedance output drivers are tuned to this impedance.
AR# 63398
Date 05/25/2018
Status Active
Type General Article
  • Zynq-7000
  • Zynq-7000Q
  • XA Zynq-7000
Page Bookmarked