AR# 63569

UG885 (v1.5) VC707 Evaluation Board for the Virtex-7 FPGA User Guide - USER_CLK_SDL / SCL I2C Address

Description

In (UG885) VC707 Evaluation Board for the Virtex-7 FPGA User Guide v1.5, Table 1-24 shows the I2C Bus Addresses for the VC707.

The table shows the I2C address for USER_CLK_SDL/SCL as 0b1110000 (0x70).

Is this correct?

Solution

The correct I2C Bus Address for USER_CLK_SDL/SCL is 0b1011101 (0x5D).

This has been updated in (UG885) v1.6.

AR# 63569
Date 06/03/2016
Status Active
Type General Article
Boards & Kits