UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63841

Xilinx Simulation Solution Center - Design Assistant - Third Party Simulators - Modelsim/Questasim

Description

 
This Answer Record contains child answer records covering issues with Modelsim or Questasim which is a supported simulator. The answer records provides explanation of these issues which you may face while using Modelsim or Questasim. The answer record also contains information related to known issues and good coding practices.
 
Note: This article is part of Xilinx Simulation Solution Center Xilinx Answer 58795. The Xilinx Simulation Solution Center is available to address all questions related to Simulation. Whether you are starting a new design with Vivado Simulator or troubleshooting a problem with a supported third party simulator, use the Xilinx Simulation Solution Center to guide you to the right information.

Solution

(Xilinx Answer 50907) Vivado Simulation - How do I use -novopt with the integrated ModelSim Simulation flow?
(Xilinx Answer 57921) Module name contention in multiple netlists which causes Error: (vsim-3389) in ModelSim simulation
(Xilinx Answer 58333) Vivado Simulator - How to tell Vivado where ModelSim/QuestaSim is installed on the machine? 
(Xilinx Answer 58328) Vivado 2013.1 Modelsim Timing Simulation fails with messages: Module ''xxx" not found where xxx = Unisim libraries
(Xilinx Answer 56692) Vivado Simulator: How to use a custom Modelsim command file with Vivado?
(Xilinx Answer 59667) Vivado/ModelSim - Modelsim fails on PLI (AXI BFM) with "Error: (vsim-3193)" and "Error: (vsim-PLI-3002)"
(Xilinx Answer 62030) ModelSim simulation of Zynq BFM throws error on non zero reset value.
(Xilinx Answer 62210) How to use MODELSIM PE with Vivado 2014.2 
(Xilinx Answer 62333) 2014.3 - Unified Simulation is not supported using 32-bit ModelSim PE/DE in Windows
(Xilinx Answer 63392) 2014.4 - Modelsim DE/PE - How do I run the AXI BFM Example Design in Vivado 2014.4?
(Xilinx Answer 62768) 2014.4 Vivado - Generated 3rd party simulator scripts leads to: Error: Failed to find design unit 

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58800 Xilinx Simulation Solution Center - Design Assistant - Third Party Simulation Tools N/A N/A

Child Answer Records

AR# 63841
Date Created 03/09/2015
Last Updated 04/02/2015
Status Active
Type General Article
Tools
  • Vivado Design Suite