We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 63919

ERROR: [IP_​Flow 19-3475] - error deleting "mig_​7series_​v2_​3_​axi4_​tg.v": no such file or directory


When re-customizing an instance of MIG in a block design, the follow error message is given when the core is regenerated:

ERROR: [IP_Flow 19-3475] Tcl error in ::ipgui_iprop_ref_design_mig_7series_0_0_1::updateAllModelParams procedure for BD Cell '/mig_7series_0'. error deleting "C:/Projects/project_1/project_1.srcs/sources_1/bd/iprop_ref_design/ip/iprop_ref_design_mig_7series_0_0/iprop_ref_design_mig_7series_0_0\example_design\rtl\traffic_gen\mig_7series_v2_2_axi4_tg.v": no such file or directory

However the mig_7series_v2_2_axi4_tg.v file does exist in this location.  

What is the cause of the error?


The problem is that the path length to this file location exceeds the 260 byte limit on Windows.  

Please refer to (Xilinx Answer 52787) for possible workarounds.

AR# 63919
Date 04/28/2015
Status Active
Type General Article
  • MIG 7 Series
Page Bookmarked