UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64110

Vivado IP Flows - After repackaging a custom IP, the coreRevision is not updated in the component.xml

Description

When I repackage my IP in IP Packager, I expect the IP revision to be automatically updated. 

However, I see that the coreRevison value does not get automatically updated in the component.xml.

Because the revision has not changed, if I run "Report IP status" in a project which uses this IP from the repository, there is no notification that the IP core is out of date.

Is this expected behavior and can it be avoided?



Solution

This issue occurs when the "Close IP Packager Window" IP Packager option is enabled or when the "Add IP to the IP Catalog of the current project" IP Packager option  is disabled.

To avoid this issue, ensure that the IP Packager settings for the project are set as follows:

  • "Close IP Packager Window" option is not selected.
  • "Add IP to the IP Catalog of the current project" is selected.



AR# 64110
Date Created 03/31/2015
Last Updated 04/30/2015
Status Active
Type Known Issues
Tools
  • Vivado Design Suite - 2014.4.1
  • Vivado Design Suite - 2014.4
  • Vivado Design Suite - 2015.1