We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64329

2014.4 Partial Reconfiguration - report_drc window fails to display all HDPR DRCs


I intend to check a particular Partial Reconfiguration DRC rule.

However, when I open the Report DRC window (Tools -> Report -> Report DRC), many HDPR DRCs are not displayed.

For example, HDPR-41 is not shown in the GUI.


This issue is fixed in Vivado 2015.1.

As a work-around in Vivado 2014.4, you can use the following commands to complete all HDPR DRCs:

create_drc_ruledeck ruledeck_2
add_drc_checks -ruledeck ruledeck_2 [get_drc_checks {HDPR-*}]
report_drc -name drc_1 -ruledeck ruledeck_2
AR# 64329
Date 05/11/2015
Status Active
Type General Article
  • Vivado Design Suite - 2014.4
Page Bookmarked