We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 64909

2015.2 XADC Wizard - Incorrect alarm limits for some of the -1L devices


In Vivado Design Suite 2015.2, THE XADC Wizard has incorrect alarm limits for some of the -1L devices.

For example in (DS181) the Vccint and Vccbram limits for the -1L are given as Min = 0.92V, Typ = 0.95V and Max = 0.98V.

However in the Wizard, the lower limit is 0.95 - 1V for Vccint and 0.95 - 1.0V for Vccbram and the Upper Limit is 1.0V - 1.05V for Vccint and 1.0 - 1.05V for Vccbram.

As a result, the alarm limits do not match the data sheet limits.

The Data sheets limits are correct and the Wizard limits are incorrect.


This is a known issue with the Wizard and will be fixed in a future release of the Wizard.

To work around the issue, you can change the limits in the VHDL code that is generated by the Wizard and include the HDL in the project instead of the XCI file.

The lines that need to be changed are the Vccint and Vccbram upper and lower alarm limits.

For example:

INIT_51 => X"53E0" -- Vccint upper alarm limit set to 0.98V

INIT_55 => X"4EC0", -- Vccint lower alarm limit set to 0.92V

INIT_51 => X"53E0" -- Vccbram upper alarm limit set to 0.98V

INIT_55 => X"4EC0", -- Vccbram lower alarm limit set to 0.92V

AR# 64909
Date 07/06/2015
Status Active
Type General Article
  • Zynq-7000
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Vivado Design Suite
  • XADC Wizard
Page Bookmarked