AR# 65209
2015.2 Vivado IP Integrator: No matching connections found for 'monitor' interface
Description
The following is currently seen in Vivado 2015.2:
This issue has been fixed in Vivado 2015.3.
Solution
To work around this issue, use the following Tcl command to make the connection between the interface pin in the hierarchical block and the interface pin IIC on the IIC IP:
connect_bd_intf_net [get_bd_intf_ports IIC] -boundary_type upper [get_bd_intf_pins hier_0/my_IIC]
Was this Answer Record helpful?
| AR# 65209 | |
|---|---|
| Date | 11/04/2015 |
| Status | Active |
| Type | Known Issues |
| Devices |
|
| Tools |
|