We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65551

UltraScale Soft Error Mitigation (SEM) IP – XCVU440 makedata.tcl only supports monolithic die SPI flash devices


If classification is enabled for a xcvu440 design, the generated makedata.tcl file must only be used with a monolithic SPI flash.


Do not target SPI flashes that are comprised of multiple stacked die. These SPI flashes are typically designed to behave like a monolithic SPI flash, but the makedata.tcl file will not generate the correct data when used with these SPI flashes. Only target monolithic SPI Flashes.

Note: Prior to Vivado 2016.1 XCVU440 is not supported for error classification and diagnostic scan. Please make sure to only use Vivado 2016.1 and later for these features.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
63609 UltraScale and UltraScale+ Soft Error Mitigation Controller - Release Notes N/A N/A
AR# 65551
Date 04/13/2016
Status Active
Type General Article
  • Vivado Design Suite
  • Soft Error Mitigation
Page Bookmarked