UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65552

UltraScale Soft Error Mitigation (SEM) IP – XCVU190 classification makedata.tcl is incorrect

Description

If classification is enabled for an xcvu190 design, the generated makedata.tcl file is incorrect.

Solution

For the version resolved please reference the release notes AR:

(Xilinx Answer 63609) UltraScale Soft Error Mitigation Controller - Release Notes Article


Please use the attached makedata.tcl file. 

Overwrite the generated makedata.tcl file in the implement directory with the one provided in this Answer Record.

The generated makedata.tcl file can be found at the following location:

<component_name>_example\<component_name>_example.srcs\sources_1\imports\<component_name>\<component_name>\implement


For Example:

With the default component_name of sem_ultra_0, the file would be located here:

sem_ultra_0_example\sem_ultra_0_example.srcs\sources_1\imports\sem_ultra_0\sem_ultra_0\implement

Attachments

Associated Attachments

Name File Size File Type
makedata.tcl 17 KB TCL
AR# 65552
Date Created 10/05/2015
Last Updated 10/19/2015
Status Active
Type Known Issues
Tools
  • Vivado Design Suite - 2015.3
  • Vivado Design Suite - 2015.2
  • Vivado Design Suite - 2015.1
IP
  • Soft Error Mitigation