UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65571

Vivado 2015.3/2015.4 - Export Simulation script with single step option fails for Cadence IUS

Description

If I export the simulation script for IUS with "-single_step" enabled, the exported script fails to run in IUS.

The below set of errors are generated:


ncvhdl_p: *W,DLCPTH (./cds.lib,1): cds.lib No such file '/project_1/project_1.cache/compile_simlib/ies/cds.lib' (cds.lib command ignored).
./../../project_1/project_1.srcs/sources_1/ipshared/xilinx.com/microblaze_v9_5/cfde4cbb/hdl/microblaze_v9_5_vh_rfs.vhd:
ncvhdl_p: *E,ERRIPR: error within protected source code.
ncvhdl_p: *E,ERRIPR: error within protected source code.
ncvhdl_p: *E,ERRIPR: error within protected source code.
ncvhdl_p: *E,ERRIPR: error within protected source code.
ncvhdl_p: *E,ERRIPR: error within protected source code.

Solution

This is a known issue with the 2015.3 version and is fixed in Vivado 2016.1.

The exported simulation script works correctly if you run export_simulation without the single step option, or by running launch_simulation.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
63956 2015.x Vivado Simulator - Known Issues N/A N/A
AR# 65571
Date Created 10/06/2015
Last Updated 04/26/2016
Status Active
Type Known Issues
Tools
  • Vivado Design Suite - 2015.3
  • Vivado Design Suite - 2015.4
  • Vivado Design Suite - 2015.4.1