We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65584

Serial RapidIO gen2 v4.0 - LPM attributes are used but rxlpmen is set to '0'


Serial RapidIO v4.0 has GT wrapper ver1.5 rev.2 which uses LPM mode for RX equalization.

Earlier versions used DFE mode.

However, gt_rxlpmen_in is still tied to '0' in the GT wrapper.


For LPM mode, a value of '1' should be used for gt_rxlpmen_in in the gt_gthe3_channel_wrapper file.

This value will be fixed in Vivado 2015.4.

AR# 65584
Date 10/23/2015
Status Active
Type General Article
  • Serial RapidIO
Page Bookmarked