UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 66161

UltraScale Evaluation Kit - KCU105 / VCU108 / VCU110 - Board Interface Test (BIT) requires full Vivado Design Edition installed to run correctly

Description

For the UltraScale Evaluation Kits (such as KCU105, VCU108, VCU110), can the Board Interface Test (BIT) run with Vivado Lab Edition installed?

Solution

To run the Board Interface Test (BIT), the complete Xilinx Vivado Design Suite, Design Edition with SDK must be installed as outlined in the board specific Software Install and Board Setup document.

Vivado Lab Edition is not sufficient to run the Board Interface Test.

Linked Answer Records

Master Answer Records

AR# 66161
Date Created 12/08/2015
Last Updated 12/21/2015
Status Active
Type General Article
Devices
  • Kintex UltraScale
  • Virtex UltraScale
Tools
  • Vivado Design Suite
Boards & Kits
  • Kintex UltraScale FPGA KCU105 Evaluation Kit
  • Virtex UltraScale FPGA VCU108 Evaluation Kit
  • Virtex UltraScale FPGA VCU110 Evaluation Kit