We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 66673

PetaLinux 2015.4 – petalinux-build fails with fs-boot error when using UltraScale MIG


petalinux-build fails with the following error message when using UltraScale MIG:

[ERROR] make[2]: *** [fs-boot.o] Error 1
[ALL  ] make[2]: Leaving directory ` build/linux/bootloader/fs-boot'
[ERROR] make[1]: *** [build] Error 2
[ALL  ] make[1]: Leaving directory `build/linux/bootloader'
[ALL  ] make: *** [sub_build_component_/none/bootloader/single/fs-boot] Error 2
[ALL  ] make: Leaving directory `build/linux'

This issue can be solved by using the attached patch.


This is a known issue and can be fixed with the attached patch.

How to use:

Copy the patch file to the location of the PetaLinux Install Directory, and run the following command:

patch -u -p1 -d ./petalinux-v2015.4-final/ < patch file name>


Associated Attachments

Name File Size File Type
0001-Add-KCU105-memory-ddr4-support.patch 1 KB PATCH
0002-Add-support-for-ddr3.patch 1 KB PATCH
AR# 66673
Date 03/03/2016
Status Active
Type General Article
  • Kintex UltraScale
  • Vivado Design Suite - 2015.4
Boards & Kits
  • Kintex UltraScale FPGA KCU105 Evaluation Kit
Page Bookmarked