UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67522

SDSoC - SDDebug and SDRelease build configurations decoupled

Description

In the SDSoC Environment SDSoC Project Overview, the SDDebug and SDRelease build configurations are now decoupled, allowing you to configure their settings independently.

Solution

As a result of this change, if you set an SDSoC option for the SDDebug build configuration (for example, marking a function for hardware acceleration) it is not set automatically in the SDRelease build configuration.

If the same settings are required in the SDDebug and SDRelease build configurations, set them for both in the SDSoC Project Overview.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
67521 SDSoC - SDSoC 2016.2 - Release Notes and Known Issues N/A N/A
AR# 67522
Date Created 07/13/2016
Last Updated 07/13/2016
Status Active
Type General Article
Devices
  • Zynq UltraScale+ MPSoC
  • Zynq-7000
Tools
  • SDSoC