UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67621

2016.2 Vivado IP FLows - ERROR: [IP_Flow 19-3439] Failed to restore IP 'clk_wiz_0' customization to its previous valid configuration

Description

In Vivado IP Integrator I have a Block Design (BD) which has a Clocking Wizard IP instance.

I update the Clocking Wizard IP instance output frequencies using a Tcl script which opens the project, reads the BD, sets the output frequency and validate the BD.

The Tcl script uses a set_property command to change the output frequency. However, I have encountered the following error message:

set_property -dict [list CONFIG.CLKOUT1_REQUESTED_OUT_FREQ {150.000}] [get_bd_cells clk_wiz_0]

ERROR: [IP_Flow 19-3439] Failed to restore IP 'clk_wiz_0' customization to its previous valid configuration.

INFO: [Common 17-17] undo 'set_property'

ERROR: [Common 17-39] 'set_property' failed due to earlier errors.

Solution

The message should be ignored. The set_property Tcl command actually sets the output frequency as specified.

This issue will be fixed in Vivado 2016.3.

AR# 67621
Date Created 08/01/2016
Last Updated 08/10/2016
Status Active
Type Known Issues
Devices
  • Zynq-7000
Tools
  • Vivado Design Suite - 2016.2
IP
  • Clocking Wizard