We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67958

2016.3 PetaLinux - XEN backend Network Driver Enabled by Default


In PetaLinux 2016.3, The XEN backend Network Driver is enabled by Default.


You can find the option to enable or disable this in the Petalinux Kernel config Menu.

1) Source the Petalinux 2016.3 toolchain.

2) Create a Petalinux Project with the ZCU102-2016.3 BSP.

3) Use the following commands:

cd Xilinx-ZCU102-2016.3
petalinux-config -c kernel

4) Select Device Drivers -> Xen driver support ---> Backend driver Support ( this is enabled by default)


AR# 67958
Date 10/27/2016
Status Active
Type General Article
  • SoC
  • FPGA Device Families
  • PetaLinux - 2016.3
Page Bookmarked