UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67960

MIPI CSI-2 Receiver Subsystem v2.1 - Why do I get a Critical Warning (Vivado 12-1433) when implementing the IP in OOC mode in the Vivado IDE?

Description

The following message is seen when implementing the MIPI CSI-2 Receiver Subsystem IP using the Vivado IDE in OOC mode:

CRITICAL WARNING: [Vivado 12-1433] Expecting a non-empty list of cells to be added to the pblock.  Please verify the correctness of the <cells> argument. [/proj/xsjhdstaff4/cbazegh/junk/kondalarao/gen_ip/gen_ip.srcs/sources_1/ip/my_ip/my_ip_impl.xdc:59]

Solution

This message can be safely ignored when using OOC mode. The constraints will be applied correctly in a full design run.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
65242 MIPI CSI-2 Receiver Subsystem - Release Notes and Known Issues for the Vivado 2013.1 tool and later versions N/A N/A
AR# 67960
Date Created 09/27/2016
Last Updated 10/13/2016
Status Active
Type General Article
IP
  • MIPI CSI-2 Receiver