We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 68003

2017.1 - 2016.3/4 Zynq UltraScale+ MPSoC: PMUFW will enable AIB (if existing) to isolate powered down components


PMUFW enables AIBs only when RPU is powered down.

For other islands, the corresponding AIBs are not enabled, which might cause issues when a master tries to access the powered down blocks.

As a result, when an access is made to a powered down block, hangs or unexpected behavior might be observed.


Software running on a master in the system should ensure that no transactions are triggered for powered down blocks.

This issue is planned to be addressed in the 2017.2 release.

AR# 68003
Date 05/03/2018
Status Active
Type General Article
  • Zynq UltraScale+ MPSoC
  • Vivado Design Suite - 2016.3
Page Bookmarked