UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 68037

QDRIV IP - vio_tg_start is unconnected to Advanced Traffic Generator (ATG)

Description

Version Found: QDRIV v1.2

Version Resolved: See (Xilinx Answer 58435)

When the Advanced Traffic Generator (ATG) is enabled for the QDRIV IP Example Design, the vio_tg_start signal should be used to start the ATG after calibration has completed.

However, the vio_tg_start signal is inadvertently left unconnected in the IP Example Design which prevents the ATG from starting.

Solution

To fix this problem, open example_top.sv and replace the following line:

.vio_tg_start                       (vio_tg_start ),

Replace it with the following:

.vio_tg_start                       (2'b11),

Revision History:

10/5/2016 - Initial Release

AR# 68037
Date Created 10/05/2016
Last Updated 10/13/2016
Status Active
Type Known Issues
Devices
  • Kintex UltraScale
  • Virtex UltraScale
IP
  • MIG UltraScale