UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 68173

VCU110, UG1073 (v1.2) - Bullseye pin numbers swapped in tables

Description

In the VCU110 Evaluation Board User Guide (v1.2) Tables 1-16, 1-18, 1-51, and 1-52 include information on the bullseye connection for the VCU110.

This information is not consistent with Figure 1-26 and Figure 1-27 - which is correct?

(UG1073) v1.2, shows a pin number swap for the bullseye connection in tables 1-16, 1-18, 1-51 and 1-52. In all of them TXP1/TXN1 is swapped with RXP1/RXN1 and TXP3/TXN3 is swapped with RXP3/RXN3.

Solution

In Tables 1-16, 1-18, 1-51, and 1-52 the pin numbers for TXP1 / TXN1 are swapped with RXP1 / RXN1, and TXP3 / TXN3 is swapped with RXP3 / RXN3.

Figure 1-26 and Figure 1-27 show the correct pin numbers, as outlined below.


 

This will be corrected in the next revision of (UG1073).

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
62604 Virtex UltraScale FPGA VCU110 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 68173
Date Created 11/03/2016
Last Updated 11/21/2016
Status Active
Type General Article
Devices
  • Virtex UltraScale
Boards & Kits
  • Virtex UltraScale FPGA VCU110 Development Kit