UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 68372

2016.4 PetaLinux: PMU firmware still pointing to pre-built images when I run the petalinux-package command

Description

The PMU firmware is still pointing to pre-built images when I run the petalinux-package command.

Solution

To work around this issue, run the petalinux-package command with the --pmufw option as shown below.

It will point to "images/linux/pmufw.elf" instead of pointing to "pre-built/"

petalinux-package --boot --format BIN --fsbl images/linux/zynqmp_fsbl.elf --fpga images/linux/design_1_wrapper.bit --u-boot images/linux/u-boot.elf --pmufw images/linux/pmufw.elf --force
AR# 68372
Date 05/17/2018
Status Active
Type General Article
Devices
Tools
Boards & Kits More Less
Page Bookmarked