UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 69787

LogiCORE IP Color Filter Array Interpolation (CFA) v7.0 - Why is the DEBUG feature not enabled when I select the Debug Checkbox?

Description

Why is the DEBUG feature not enabled when I select the Debug Checkbox?

Solution

The problem is that the parameter that propagates the feature to the software driver passes the wrong type.

This issue will not be fixed. 

Users are encouraged to move to the LogiCORE Sensor Demosaic IP as a replacement for the LogiCORE Color Filter Array Interpolation (CFA).

There are 2 ways to work around this issue:


  1. Disable the Debug feature and add an external pattern generator like the LogiCORE Test Pattern Generator.
  2. Manually modify the parameter propagation in the xparameters.h file.

Note: The xparameters.h is overwritten whenever when the BSP is regenerated.

To modify the parameter, change the following line:

#define XPAR_V_CFA_0_HAS_DEBUG 0

Change it to:

#define XPAR_V_CFA_0_has_debug 1

Linked Answer Records

Master Answer Records

AR# 69787
Date 10/06/2017
Status Active
Type General Article
IP
Page Bookmarked