AR# 70025

2017.3.1 Vivado - Vivado 2017.3 Update 1 (2017.3.1) Release Notes

Description

This answer record serves as the Vivado 2017.3 tool update 1 (2017.3.1) Release Notes, and contains links to information about what is included in the update.

Solution

The Vivado 2017.3 tool update 1 (2017.3.1) addresses the following issues:

Vivado 2017.3 Update 1 provides:

  • Production speed files for Zynq UltraScale+ MPSoC Devices: ZU2EG/CG (-1L, -2L), ZU3EG/CG (-1L, -2L), ZU9EG/CG (-1L, -2L), ZU6EG/CG (1L, -2L), ZU15EG (-1L, -2L)
  • Production speed files for Kintex UltraScale+ Device: KU9P (-1L, -2L), KU13P (1L, -1LV, -2L, -2LV)
  • Production speed files for Virtex UltraScale+ Devices: XCVU3P (-2L), XCVU7P/VU5P (-2L), VU9P (-2L), VU13 (-2L)

For designs leveraging these devices, Xilinx recommends installing this update.

For all other devices, please continue to use the Vivado 2017.3 release.

Downloading and installing the Vivado 2017.3 update (2017.3.1)

  • The update is available at: https://www.xilinx.com/download
  • The download file for this update is approximately 3.28 GB.
  • It must be applied to an existing 2017.3 (SW Build 2018833) installation, and will bring the Vivado version to 2017.3.1.


Known Issues specific to Vivado 2017.3 update 1 (2017.3.1)

On date of release there were no known issues specific to the Vivado 2017.3.1 release.


For Vivado 2017.3 known issues see: (Xilinx Answer 68923)

For known issues related to a specific IP, please search the support site for "Known Issues" and the IP name.

AR# 70025
Date 10/27/2017
Status Active
Type Release Notes
Tools