We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7010

Foundation schematic editor 2.1i: Some schematic components do not print out properly


Foundation, Schematic editor, 2.1i, FJKCE, printing,
library, virtex

Urgency: Standard

The OPAD16, FJKC, and FJKCE components in the Virtex Schematic library show up on the schematiceditor with the following printing
10 0 3 0 LIBVER=2.0.0
This should not be present on the schematic.
Deleting the LIBVER property does not fix this problem


This is a known issue. The workaround is to use different library components to achieve the same functionality. For example, 2 OPAD8 symbols
can be used instead of the OPAD16 symbol.

This is a printing issue only and will not affect the functionality of the design.
AR# 7010
Date 03/05/2002
Status Archive
Type General Article
Page Bookmarked