AR# 70308

|

MIPI CSI-2 Receiver Subsystem - Which licenses are needed to generate the MIPI CSI-2 Application Example Design?

Description

I have a valid license for the MIPI CSI-2 RX Subsystem IP (Full or Hardware Evaluation License) but when I try to generate the Application Example design for this IP, by following the chapter 5 of the PG232, I got an error related to licensing:

ERROR: [BD 41-542] Parameter cannot be set on a locked block. The block 'mipi_dsi_tx_subsystem_0' is locked, because: * IP 'design_1_mipi_dsi_tx_subsystem_0_0' requires one or more mandatory licenses but no valid licenses were found. However license checkpoints may prevent use of this IP in some tool flows.
Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.

Why am I not able to generate the MIPI CSI-2 Receiver Subsystem Application Example Design? 

Which licenses are required?

Solution

The MIPI CSI-2 Receiver Subsystem Application Example Design is a full design which includes multiple Xilinx IPs as per the figure 5-1 from the (PG232):

70308-1.png
70308-1.png



 

The following Xilinx IPs require a license (Full or Hardware Evaluation) in order to generate the MIPI CSI-2 RX Application Example Design:

Notes:

1 The Xilinx Test Pattern Generator (TPG) is provided at no cost under the terms of the Xilinx Core License Agreement.

2 The HDMI Subsystems license is not required to generate the Block Design for the Application Example Design (the license is required to generate a bitstream).

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
65242 MIPI CSI-2 Receiver Subsystem - Release Notes and Known Issues for the Vivado 2015.3 tool and later versions N/A N/A
AR# 70308
Date 12/20/2017
Status Active
Type General Article
Tools
IP
Boards & Kits
People Also Viewed