AR# 71493

|

PetaLinux Image Generation and System Example Design with ZCU102 PS-PCIe as Root Complex and ZC706 as Endpoint

Description

This answer record provides a document on "PetaLinux Image Generation and System Example Design with ZCU102 PS-PCIe as Root Complex and ZC706 as Endpoint" in a downloadable PDF to enhance its usability.

Answer Records are Web-based content that are frequently updated as new information becomes available. 

Visit this answer record to obtain the latest version of the PDF.


This article is part of the PCI Express Solution Centre

(Xilinx Answer 34536)Xilinx Solution Center for PCI Express

Solution

This document attached with this answer record describes an example design consisting of Zynq UltraScale+ MPSoC ZCU102 and Zynq-7000 SoC ZC706. 

The ZCU102 is configured as root complex while ZC706 is configured as an endpoint. 

The document goes through the detailed steps for design creation for ZCU102 and ZC706 in Vivado and PetaLinux Image generation for ZCU102 required to boot Linux on the Zynq ZCU102 device. 

The relevant design files for Vivado 2018.2 have also been provided in the attached zip file. 

Revision History:

09/14/2018 - Initial Release

Attachments

Associated Attachments

AR# 71493
Date 09/14/2018
Status Active
Type General Article
IP
People Also Viewed