AR# 71494

|

PetaLinux Image Generation and System Example Design with ZC706 as Root Complex and KC705 as Endpoint

Description

This answer record provides a document on "PetaLinux Image Generation and System Example Design with ZC706 as Root Complex and KC705 as Endpoint" in a downloadable PDF to enhance its usability. 

Answer Records are Web-based content that are frequently updated as new information becomes available. 

Visit this answer record to obtain the latest version of the PDF.


This article is part of the PCI Express Solution Centre

(Xilinx Answer 34536) Xilinx Solution Center for PCI Express

Solution

The document attached to this answer record describes an example design consisting of a Zynq-7000 SoC ZC706 board and Kintex-7 KC705 board.

The Zynq-7000 SoC ZC706 is configured as the root complex while the KC705 is configured as an endpoint. 

The document goes through the detailed steps for design creation for ZC706 and KC705 in Vivado, and PetaLinux Image generation for ZCU706, which is required to boot Linux on the Zynq-7000 device. 

The relevant design files for Vivado 2018.2 have also been provided in the attached zip file. 

Revision History:

09/19/2018 - Initial Release

Attachments

Associated Attachments

Name File Size File Type
Xilinx_Answer_71494_ZC706_KC705.zip 42 MB ZIP
Xilinx_Answer_71494_ZC706_KC705.pdf 8 MB PDF
AR# 71494
Date 09/19/2018
Status Active
Type General Article
IP
People Also Viewed