UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 71802

2018.3 LogiCORE Video Mixer Linux Driver - Why do I see the Red and Blue colors swapped when setting the IP GUI configuration and the video format in the device tree for RGB and BGR?

Description

Why do I see the Red and Blue colors swapped when setting the IP GUI configuration and the video format in the device tree for RGB and BGR?

This can be seen when the following are set:


IP GUI Device Tree Node (xlnx,vformat)
RGB8RG24
BGR8BG24

 

Solution

This is a known issue in the 2018.3 release that will be resolved in the 2019.1 version.

To work around this issue, you can change the device tree xlnx,vformat as follows:

IP GUI Device Tree Node (xlnx,vformat)
RGB8BG24
BGR8RG24


Note: You should change back to the expected values once this issue is fixed.

Linked Answer Records

Master Answer Records

AR# 71802
Date 12/10/2018
Status Active
Type General Article
IP
Page Bookmarked