AR# 72430

2019.1 Vivado/XSDK Flash Programming for Zynq-7000 and Zynq UltraScale+: Error on supported Macronix QSPI flashes

Description

(UG980) states that the 2019.1 tools support programming of the following three QSPI flashes in Zynq-7000 and Zynq UltraScale+ MPSoC/RFSoC devices:

  • mx66l2g45g
  • mx66u2g45g
  • mx25u51245f

However, when Programming these flashes the tools return the below error:

ERROR: [Xicom 50-186] Error while detecting SPI flash device - unrecognized JEDEC id bytes: c2, 25, 3c

Solution

In order to enable support for those three QSPI flashes the user must apply the attached patch by doing the following:

VIVADO:

Unzip the attached file and replace the files in your <vivado_2019.1_install>/data/xicom/cfgmen/uboot folder

Xilinx SDK:

Unzip the attached file and replace the files in your <xsdk_2019.1_install>/data/xicom/cfgmen/uboot folder.

Attachments

Associated Attachments

Name File Size File Type
u-boot-2019-1.zip 4 MB ZIP
AR# 72430
Date 06/12/2019
Status Active
Type General Article
Devices
Tools