UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 794

5.2 XDE,EDIT LCA - INTERNAL PROGRAM ERROR (Please contact support personnel): bprog: 19,6: 10: not a pip

Description

Problem:
When editing the CLB in LCA file, the following error could occur:

15: 35 15: yq_qy: not a pip
16: 11 7: h2_f: not a pip
17: 11 9: h_h1: not a pip
18: 11 13: h_g: not a pip
19: 27 3: ffx_k: not a pip
20: 27 12: ffy_k: not a pip
21: 26 17: ffy_set: not a pip
22: 26 11: ffy_reset: not a pip
23: 26 8: ffx_set: not a pip
24: 26 1: ffx_reset: not a pip
25: 28 5: xqec_ec: not a pip
26: 28 14: yqec_ec: not a pip
27: 7 8: f_din_din: not a pip
28: 3 9: f_we: not a pip
29: 7 18: g_din_din: not a pip
30: 7 19: g_din_h1: not a pip
31: 3 17: g_we: not a pip
INTERNAL PROGRAM ERROR (Please contact support personnel):
bprog: 19,6: 10: not a pip.
INTERNAL PROGRAM ERROR (Please contact support personnel):
bprog: 35,6: 58: not a pip.
INTERNAL PROGRAM ERROR (Please contact support personnel):
bprog: 27,3: 18: not a pip.
Press any key to continue.

Cause:
The problem here is that a certain data file which defines the internals
of the 4000 CLB is not installed properly. The file is f4000fg.xcb,
and it should be in the \xact\data directory. The correct file is:
F4000FG.XCB 5,477 bytes 10/23/95 2: 24: 10 PM

If you are upgrading your software from 5.2.0 beta to 5.2.0, if you are installing the software in the same directory, and if the data file f400fg.xcb is not installed, then the software trys to use the data file of Beta version software with the 5.2 Production Release software. This could result in Internal Program Error when editing the CLB in his LCA file.



Solution

1

Copy the f400fg.xcb file from the \XACT\DATA directory on the install CDROM
into the XACT\DATA directory on your disk.

2

alternate sol'n:

copy the entire xact/data directory off the CD to your xact/data directory.
AR# 794
Date Created 08/31/2007
Last Updated 03/22/2000
Status Archive
Type ??????