UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 8021: 2.1i COREGEN (Japanese Version ONLY): "ERROR: Gui Field component_name not found"

AR# 8021

2.1i COREGEN (Japanese Version ONLY): "ERROR: Gui Field component_name not found"

Description

Keywords: coregen, Single Port Block Memory, Dual Port Block Memory, GUI field,
component_name not found, elaboration.

Urgency: hot

General Description
If you are using the Japanese version of Coregen 2.1i, you may see the following error
from Coregen when trying to generate a Single or Dual Port Block Memory. (Note that
part of this message may be displayed in Japanese)

ERROR: Gui Field component_name not found
ERROR: Customize Parameter Rule unable to verify. Core elaboration will be terminated (Japanese message)
ERROR: SIM Generator: Core Single_Port_Block_Memory SIM customize parameter cannot be verified.
ERROR: Core Single_Port_Block_Memory cannot be generated.
ERROR: Core Single_Port_Block_Memory cannot be generated.


Solution


To correct this problem, download and install Core Generator update
C_IP3 from the following location:

http://support.xilinx.co.jp/ipcenter/coregen/updates.htm#Current
Please be sure that C_IP3 is downloaded from Japanese
Xilinx Web site(www.xilinx.co.jp).

If you are using the English version of Core Generator 2.1i, then
C_IP3 must be downloaded from English Xilinx web site
(www.xilinx.com).

This problem has been obsoleted by the C_IP4 release.
AR# 8021
Date 02/14/2000
Status Archive
Type General Article
Page Bookmarked