We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8086

NGDBUILD, EXEMPLAR, SYNPLICITY: Error ngdhelpers 634: Port ".." is specified. There is no pad allocated to this signal


ngdbuild, ngdhelpers, error, pad, exemplar, synplicity

Urgency: Standard

During Translate, this error message comes up:
ngdhelpers: 634: Port "..." is specified as of type "...".
There is no pad allocated to this signal.


During synthesis, check and make sure that the
"Add I/O Pads" option is checked. Otherwise, the
synthesis tools do not attach Xilinx-specific I/O
Pads to the netlist and this error will appear.
AR# 8086
Date Created 09/01/2007
Last Updated 10/01/2008
Status Archive
Type General Article