You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
XC3000: How to specify FGM mode in a schematic design using a CLBMAP
Keywords: FGM, schematic, CLB, XC3000
If you want to use FGM mode in a 3k design but don't want to
use a CLB primitive library symbol. FGM mode is used when there
is 'P' attribute on the E-pin of a CLB MAP
(1) Use a CLBMAP in schematic.
(2) E-pin of the CLBMAP must be a net going to the
select line of a mux
(3) Place a 'P' attribute on the CLBMAP E-pin.
Was this Answer Record helpful?