AR# 8201

4.1i CORE Generator - "ERROR: File com\xilinx\ip\<class name>.class not found in library <library name>"

Description

Keywords: Foundation, CORE Generator, COREGen, class, IP, library

Urgency: Standard

General Description:
When I attempt to create a core using CORE Generator, an error of the following type is reported:

ERROR: Resource file
c:\fndtn\coregen\ip\xilinx\baseblox_v1_0\com\xilinx\ip\com\xilinx\ip\baseblox_v1_0\C_DECODE_BINARY_V1_0.class
not found in library
c:\fndtn\coregen\ip\xilinx\baseblox_v1_0\com\xilinx\ip.
ERROR: File com\xilinx\ip\baseblox_v1_0\C_DECODE_BINARY_V1_0.class not
found in library baseblox.
ERROR: File com.xilinx.ip.baseblox_v1_0.C_DECODE_BINARY_V1_0 not found
in library baseblox.
ERROR: Could not load/define class file
com.xilinx.ip.baseblox_v1_0.C_DECODE_BINARY_V1_0.
ERROR: Could not load/define class file
com.xilinx.ip.baseblox_v1_0.C_MUX_BUS_V1_0.
ERROR: Could not load/define class file
com.xilinx.ip.baseblox_v1_0.C_MUX_BUS_V1_0.
ERROR: NULL Core class returned from IPCore.
ERROR: Elaboration failure for core Bus_Multiplexer
ERROR: Elaboration of core Bus_Multiplexer failed

Solution

Look in the specified directory to verify that the files are missing.

If this problem is seen with respect to a module that is part of a newly installed IP update, try reinstalling the update as follows:

1. Extract the IP update archive into a temporary directory.

2. Copy the newly extracted file structure into the Foundation directory (e.g., C:\Fndtn) or top-level Xilinx directory (e.g., C:\XILINX).

Problems of this nature have been encountered in the past with newer versions of the UNZIP software on UNIX platforms. For additional information, please see (Xilinx Answer 7711).
AR# 8201
Date 10/09/2003
Status Archive
Type General Article