UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8636

IBIS - Why are Vmeas/Cref/Rref/Vref not included for the HSTL1_I model in the Virtex IBIS file?

Description

There is not a value given for the Vmeas/Cref/Rref/Vref parameters in the HSTL1_I model in the Virtex IBIS file.

Solution

These parameters are used in the timing simulation of output signals based on their loading. The HSTL1_I is an input model only, so these output timing parameters do not apply.

AR# 8636
Date Created 08/21/2007
Last Updated 12/15/2012
Status Active
Type General Article