UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 9264: 3.1i Foundation ISE - COREGen ECS Symbol is not generated by default for fixed point cores.

AR# 9264

3.1i Foundation ISE - COREGen ECS Symbol is not generated by default for fixed point cores.

Description

Keywords: Foundation ISE, Project Navigator, COREGen, core generator, ECS, fixed point

Urgency: Standard

General Description:
After a CORE has been created, Project Navigator creates an
ECS symbol and adds the XCO file to the project. However, this
does not happen for fixed point cores.

(FFT, 12x12 Multiplier, 8x8 Multiplier)

Solution

Installing the latest CORE Generator IP Update resolves
the XCO file issue. The latest update can be found at:

(http://www.xilinx.com/ipcenter/coregen/updates.htm)

An ECS schematic symbol can be generated by following
the instructions in (Xilinx Solution 9910).
AR# 9264
Date 01/16/2003
Status Archive
Type General Article

By using this website, I accept the use of cookies.   Learn more

Page Bookmarked