You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
3.1i CAE Install - When using Mentor, Cadence, or Innoveda (Viewlogic), I cannot select all devices (such as Virtex-E, XC3100A/L)
Keywords: 3.1i, Install, CAE, library, Mentor, Cadence, Innoveda, Viewlogic, Virtex-E, Spartan-II, XC3100 Urgency: Hot General Description: During the installation of the 3.1i CAE Library, I cannot select all devices for my CAE Tool. Although there is a check-box next to my target device, nothing happens when I click it. Additionally, when I click the "Select-All" button, not all devices are marked. This problem specifically pertains to: Mentor/Cadence Virtex-E XC3100 A/L Innoveda (Viewlogic) Spartan-II Virtex-II XC4000E/EX/L XC3100A/L XC5200
1 Mentor/Cadence/Innoveda Users: - To target Virtex-E devices, use the Virtex library. - To target XC3100 A/L devices, use the XC3000 A/L library. 2 Innoveda Users only: A problem exists with the 3.1i CAE Installer for Innoveda in that Spartan-II, Virtex-II, XC4000E/EX/L, and the XC5200 devices cannot be targeted. These devices are fully supported by Innoveda and Viewlogic -- this is simply a problem with the CAE Installer. A tactical patch has been created for this issue; please see (Xilinx Answer 8214) for more information.
Was this Answer Record helpful?