UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9491

3.1i, trce, ERROR:Trace:12 - Invalid speed "min" specified on command line.

Description

General Description:

When generating STAMP data for mimimum timing values in trace the following error is generated

ERROR: Trace - Invalid speed 'min' specified on command line

Solution

The TRCE tool with the -s min switch does support VirtexE. If a design has any unrouted signals this error will arise. Users will also get this error in 3.1i (no service pack). The min speed files for virtexe are not released in Dolomite. This should be included in 3.1i service pack2.

For the latest update goto the following URL:

http://www.partner.xilinx.com/common/fae/speedfiles/ (internal)

AR# 9491
Date Created 06/13/2000
Last Updated 01/18/2010
Status Archive
Type General Article